Bell 206B accident near Milo, OR
On October 28, 2013, a Bell 206B (helicopter) was involved in an accident near Milo, OR. 3 people were seriously injured. Damage to the aircraft: substantial.
- Date
- October 28, 2013
- Place
- Milo, OR
- Aircraft
- Bell 206B · Helicopter
- Injuries
- 0 fatal, 3 serious, 0 minor
- Damage
- Substantial
- Position
- 42.954°N, 123.149°W
- NTSB ID
- 20131113X11809
Official records · WPR14CA052
- Public docket: reports, statements and exhibits from the investigation
NTSB summary
The pilot stated that the purpose of the flight was for the two passengers, who were both biologists, to conduct a low-level river/land survey. Prior to departure, the pilot discussed the route of flight with the passengers and they all reviewed the maps and sectionals for possible hazards with an emphasis on wire crossings. After departure, the pilot attempted to facilitate the biologists' view out the windows by maneuvering the helicopter in a crab angle with the flight path tracking down the riverbank and the nose pointing left. The pilot maintained an altitude just above tree-top level and about an hour into the flight the pilot observed the first high power line crossing. Approximately 20 minutes thereafter, one of the passengers called attention to another line crossing, which was equipped with marker balls. The pilot stated that as they continued, the river divided into numerous channels and one of the passengers advised him which path to follow. After surveying one of the channels, he maneuvered the helicopter in a 90-degree turn to circle back and then it was decided they did not need to return to the channel's origin. The pilot then made a left turn to adjoin the river and immediately observed blue sparks and a wire contact on the upper windscreen bubble. The helicopter was substantially damaged after it descended and came to rest in 4.5 feet of water about 50 feet from the power line. The pilot reported no preimpact mechanical malfunctions or failures with the helicopter that would have precluded normal operation.
Probable cause
The pilot's failure to see and avoid wires while maneuvering at a low-altitude, which resulted in the main rotor blades striking the wires.
More accidents in OR
- Cessna T207A, Aug 21, 1986
- Piper PA-28-180, Sep 1, 1984
- Piper PA-28RT-201, Mar 12, 1984
- Piper PA 46-310P, Apr 7, 2017
- Cessna 172, Jun 23, 2012
Browse: Oregon · Bell aircraft
Source: NTSB aviation accident database (US government, public domain). Findings may be preliminary or later revised by the NTSB. Not a complete global record.
